Icom ic-M802 DSC

Icom IC-M802 Digital Marine SSB Transceiver

Standard 4×8 remote controller

The IC-M802 offers an industry-standard 4-inch tall (10.16 cm) remote controller. When set up with the IC-M502 / IC-M504 VHF radio, Icom offers you a complete communications station.

Large LCD with dot matrix characters

You can easily read the alphanumeric name of any of the 1355 ITU channels at a glance with the large LCD display. Nighttime operation is no problem with 10 levels (plus OFF) adjustable backlit display and keypad.

Easy to use in all conditions

The IC-M802 offers two large dials – bank and channel – for easy channel selection. Up to 16 banks of 20 (max.) each for user channels, and 17 banks for ITU channels are available.

Built-in digital selective calling/ITU Class E DSC

For added safety at sea, the IC-M802 offers the latest in one-touch DSC emergency communications technology. (ITU Class E standard.) The emergency button is covered by a red, spring loaded hatch to avoid accidental DSC activation.

Digital signal processor advantage

The speech compressor, utilizing DSP, increases average talk power. Flexible filter settings provide for narrow band signals like e-mail, SITOR, FSK and other operation without an optional filter.

150W (PEP) of powerful output

150 Watts of power offers superior worldwide communications. A one piece, die cast aluminum chassis and a large cooling fan allow continuous transmission at full output power– very important for data communications, like e-mail.

One-touch e-mail access

An SSB first! The IC-M802 can be set to memorize your HF e-mail access frequency, mode and bandwidth settings. At sea e-mail has never been easier.
* Please consult with an HF e-mail provider for details.

Automatic antenna tuner, AT-140

An optional automatic antenna tuner, AT-140, easily connects to the IC-M802. When the tuner cannot tune the antenna, the IC-M802 bypasses the tuner and displays a warning indicator on the LCD.

Other features

• Wide band receive coverage (0.5 – 29.9999MHz)
• Remote control mic allows you to select channels directly
• Accessory RS-232C port allows connection of modem, etc.
• GPS input, NMEA 0183 version 3.01
• A headphone jack in front of the controller

 

SPECIFICATIONS

Frequency range	Tx	1.6–2.9999 MHz 4.0–4.9999 MHz 6.0–6.9999 MHz 8.0–8.9999 MHz 12.0–13.9999 MHz 16.0–17.9999 MHz 18.0–19.9999 MHz 22.0–22.9999 MHz 25.0–27.5000 MHz
	Rx	0.5–29.9999 MHz
Power supply requirement		13.6V DC ±15% (negative ground)
Dimensions (W×H×D) (Projections not included)		Main unit: 240×94×238.4 mm; 9.4×3.7×9.4 inController unit: 220×110×84.4 mm; 8.7×4.3×3.3 in
Weight (approx.)		Main unit: 4.7kg; 10 lb 6 oz,Controller unit: 570g; 1 lb 4 oz
Current drain (approx.)	Transmit (High)	30A typ. at max. power
	Max. audio output	3.0A
Sensitivity		J3E, A1A: 0.5–1.5999 MHz 30 dBμV emf 1.6–1.7999 MHz 13 dBμV emf 1.8–29.9999 MHz 8 dBμV emfJ2B, F1B: 1.6–1.7999 MHz 13 dBμV emf 1.8–29.9999 MHz 8 dBμV emfH3E: 0.5–1.5999 MHz 44 dBμV emf 1.6–1.7999 MHz 30 dBμV emf 1.8–3.999 MHz 24 dBμV emfDSC (J2B): 0.5–29.999 MHz 0 dBμV emf (at 1% error rate)
Audio output power (10% dist/ 4Ω load)		4.0W
RF output power (PEP) (output power differs depending on version)		150/60/20W

All stated specifications are subject to change without notice or obligation.