Icom IC-G80
HT Icom IC-G80. Professional in every sense! Performance, build, audio and operation!
- 5W output power, 136-174MHz full VHF coverage
- Professional RF performance, resistance to interference
- 750mW* loud and intelligible audio with BTL amplifier and large 36mm speaker *
Typical value with internal speaker. - IP54 and MIL-STD-810 rugged construction
- Large capacity Li-Ion battery pack provides 18.5 hours* of operating time
* Typical operation. 5:5:90 duty cycle with auto power save. - Wide/narrow channel spacing
- Integrated VOX function
- 200 channels Built-in CTCSS and DTCS encoder/decoder
- 5 character alphanumeric display
- Priority, memory and skip scanning
- 16 DTMF autodial memories
- Repeater lockout and busy channel lockout
- Time-out-timer
- Power save function and auto power off
Spesifikasi Icom IC-G80
General
IC-G80 |
|||
---|---|---|---|
Frequency range |
136MHz–174MHz
|
||
Number of channels |
200 channels
|
||
Channel spacing |
12.5kHz/25kHz
|
||
Type of emission |
F2D/F3E
|
||
Current drain | Tx | 1.4A (5W) | |
Rx | Stand-by |
60mA typ.
|
|
Max. audio |
300mA (Internal SP)
|
||
Dimensions (W×H×D) (Projections are not included) |
58×112×30 mm
|
||
Weight |
140g (Without battery pack)
360g (With BP-264 and antenna) |
Transmitter
IC-G80 |
|
---|---|
RF output power (at 7.2V DC) |
5.0/2.5/0.5W (High/Mid/Low)
|
Spurious emissions |
Less than -70dB
|
Frequency stability |
±2.5ppm
|
Receiver
IC-G80 |
||
---|---|---|
Sensitivity (at 12dB SINAD) |
0.18μV typ.
|
|
Adjacent channel selectivity (W/N) |
72/65dB typ.
|
|
Spurious & Image rejection |
80dB typ.
|
|
Intermodulation rejection |
72dB typ.
|
|
AF output power (at 5% distortion ) |
Internal SP (With 16Ω load) |
750mW typ.
|
External SP (With 8Ω load) |
420mW typ.
|
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard |
MIL-810 F
Method, Proc. |
---|---|
Low Pressure Storage |
500.4 I
|
Low Pressure Operation |
500.4 II
|
High Temperature Storage |
501.4 I
|
High Temperature Operation |
501.4 II
|
Low Temperature Storage |
502.4 I
|
Low Temperature Operation |
502.4 II
|
Temperature Shock |
503.4 I
|
Solar Radiation |
505.4 I
|
Rain Blowing |
506.4 I
|
Rain Drip |
506.4 III
|
Humidity Induced |
507.4
|
Salt Fog |
509.4
|
Dust Blowing |
510.4 I
|
Vibration |
514.5 I
|
Shock Functional |
516.5 I
|
Shock Transit Drop |
516.5 IV
|
Also meets equivalent MIL-STD-810 -C, -D and -E.
Ingress Protection Standard
Dust & Water |
IP54 (Dust-protection and water resistant)
|
---|
All stated specifications are subject to change without notice or obligation.