Hytera TS-9200
Hytera TS-9200 BDA Bi-Directional Amplifier digunakan untuk menyediakan komunikasi dua arah antara radio terminal dan stasiun induk, dalam lingkungan apapun. Dapat digunakan di luar ruangan untuk memperluas cakupan jangkauan stasiun induk agar layanan komunikasi tersedia di wilayah tanpa sinyal atau dengan sinyal lemah. Dapat juga digunakan di dalam ruangan untuk meningkatkan kekuatan sinyal.
Keunggulan Produk
- Desain dengan modul untuk memudahkan pemeliharaan
- Pemantauan jauh perangkat lunak (GSM、Ethernet (SNMP) 、port serial), untuk memudahkan pemeliharaan dan manajemen.
- Teknologi SDR (Software Defination Radio atau Radio Sinyal Perangkat Lunak), menyaring daya output yang tidak berhubungan dan memastikan daya output yang stabil serta output spektrum jernih.
- Fungsi Pengalihan Saluran. Dengan fungsi ini, saluran akan secara otomatis ditutup jika tidak ada panggilan dalam jangkauan yang akan sangat mengurangi dampak stasiun induk.
- Tahan debu, Anti lembab & kedap air, dengan persyaratan mudah pada lingkungan pemasangan;
- Dengan amplifier daya linearitas tinggi dan duplekser penolakan tinggi, sehingga mampu menolak intermodulasi dan sinyal tersebar;
BDA Type:
- Integrated RF BDA
- Fiber Optical BDA(Coupling by air)
- Fiber Optical BDA(Coupling directly)
Product Highlights
- With modularized design, easy for maintenance;
- Software remote monitoring (GSM、Ethernet(SNMP) 、serial port), easy for maintenance and management.
- SDR (Software Defination Radio) Technology, filtering irrelative and ensuring stable output power & clean spectrum output.
- Function of Channel Switch. With this functions, the channel will automatically be shut down if there is no call in the coverage, which can strongly reduce the impact of base stations.
- Dustproof, moistureproof & waterproof, with low requirements on installation environment;
- With high-linearity power amplifier and high-rejection duplexer, capable of rejecting intermodulation and spurious signals;
Application Examples
- Coverage Solution for Tunnels Signals are strongly shielded in long and narrow tunnels due to barriers such as mountains. As a result, there is almost no signal except the entrance and exit. BDA would throw this problem away.
- Coverage Solution for Roads and Railways
- Coverage Solution for Indoor Areas
- Coverage Solution for Outskirts Areas
- Coverage Solution for Congested Residential Areas
Integrated RF BDA
|
|
Frequency Range
|
VHF,350-470MHz,800MHz
|
Protection
|
IP55
|
Weight
|
35kg
|
Dimension (L x W x H)
|
705x400x202mm
|
Power Supply
|
AC180~260V(45~55Hz)/DC-40~-55V
|
Connector Type
|
N-connector (female)
|
Monitoring Mode | GSM、Ethernet(SNMP)、RS232 |
Environment Humidity | ≤ 95% RH |
InputOutput Impedance | 50Ω |
Noise Factor | ≤5dB |
Signal Delay | ≤ 35us (Channel-selective) ≤ 5us (Band-selective) |
Power Consumption | <300W |
Downlink
|
Uplink
|
IP3: 62dBm
|
IP3: 62dBm
|
Gain: 90dB
|
Gain: 90dB
|
Input Level: -80 ~ -45dBm
|
Input Level: -105~ -60dBm
|
Output Power: 40dBm(10W) |
Output Power: 33dBm(2W)
|
Fiber optical BDA(Coupling by air)
|
|
Frequency Range
|
VHF: 350-470MHz,800MHz
|
Protection | IP55 |
Weight | 25kg/25kg |
Dimension (L x W x H)
|
460x400x202mm / 460x400x202mm
|
Power Supply | AC180~260V(45~55Hz)/DC-40~-55V |
Connector Type | N-connector (female) |
Monitoring Mode | GSM、Ethernet(SNMP)、RS232 |
Environment Humidity | ≤ 95% RH |
InputOutput Impedance | 50Ω |
Noise Factor
|
≤5dB
|
Signal Delay
|
≤ 35us (Channel-selective) ≤ 5us (Band-selective)
|
Power Consumption
|
<100W / <100W
|
Downlink
|
Uplink
|
IP3: 62dBm
|
IP3: 62dBm
|
Gain: 110dB
|
Gain: 110dB
|
Input Level: -80 ~ -45dBm
|
Input Level: -110 ~ -70dBm
|
Output Power: 37dBm(5W) | Output Power: 30dBm(1W) |
All specifications are subject to change without notice due to continuous development.
Integrated RF BDA
|
|
Frequency Range
|
VHF,350-470MHz,800MHz
|
Protection
|
IP55
|
Weight
|
35kg
|
Dimension (L x W x H)
|
705x400x202mm
|
Power Supply
|
AC180~260V(45~55Hz)/DC-40~-55V
|
Connector Type
|
N-connector (female)
|
Monitoring Mode | GSM、Ethernet(SNMP)、RS232 |
Environment Humidity | ≤ 95% RH |
InputOutput Impedance | 50Ω |
Noise Factor | ≤5dB |
Signal Delay | ≤ 35us (Channel-selective) ≤ 5us (Band-selective) |
Power Consumption | <300W |
Downlink
|
Uplink
|
IP3: 62dBm
|
IP3: 62dBm
|
Gain: 90dB
|
Gain: 90dB
|
Input Level: -80 ~ -45dBm
|
Input Level: -105~ -60dBm
|
Output Power: 40dBm(10W) |
Output Power: 33dBm(2W)
|
Fiber optical BDA(Coupling by air)
|
|
Frequency Range
|
VHF: 350-470MHz,800MHz
|
Protection | IP55 |
Weight | 25kg/25kg |
Dimension (L x W x H)
|
460x400x202mm / 460x400x202mm
|
Power Supply | AC180~260V(45~55Hz)/DC-40~-55V |
Connector Type | N-connector (female) |
Monitoring Mode | GSM、Ethernet(SNMP)、RS232 |
Environment Humidity | ≤ 95% RH |
InputOutput Impedance | 50Ω |
Noise Factor
|
≤5dB
|
Signal Delay
|
≤ 35us (Channel-selective) ≤ 5us (Band-selective)
|
Power Consumption
|
<100W / <100W
|
Downlink
|
Uplink
|
IP3: 62dBm
|
IP3: 62dBm
|
Gain: 110dB
|
Gain: 110dB
|
Input Level: -80 ~ -45dBm
|
Input Level: -110 ~ -70dBm
|
Output Power: 37dBm(5W) | Output Power: 30dBm(1W) |
All specifications are subject to change without notice due to continuous development.