Icom IC-G80
HT Icom IC-G80. Professional in every sense! Performance, build, audio and operation!
- 5W output power, 136-174MHz full VHF coverage
 - Professional RF performance, resistance to interference
 - 750mW* loud and intelligible audio with BTL amplifier and large 36mm speaker *
Typical value with internal speaker. - IP54 and MIL-STD-810 rugged construction
 - Large capacity Li-Ion battery pack provides 18.5 hours* of operating time
* Typical operation. 5:5:90 duty cycle with auto power save. - Wide/narrow channel spacing
 - Integrated VOX function
 - 200 channels Built-in CTCSS and DTCS encoder/decoder
 - 5 character alphanumeric display
 - Priority, memory and skip scanning
 - 16 DTMF autodial memories
 - Repeater lockout and busy channel lockout
 - Time-out-timer
 - Power save function and auto power off
 
Spesifikasi Icom IC-G80
General
| 
 IC-G80  | 
|||
|---|---|---|---|
| Frequency range | 
 136MHz–174MHz 
 | 
||
| Number of channels | 
 200 channels 
 | 
||
| Channel spacing | 
 12.5kHz/25kHz 
 | 
||
| Type of emission | 
 F2D/F3E 
 | 
||
| Current drain | Tx | 1.4A (5W) | |
| Rx | Stand-by | 
 60mA typ. 
 | 
|
| Max. audio | 
 300mA (Internal SP) 
 | 
||
| Dimensions (W×H×D) (Projections are not included)  | 
 58×112×30 mm 
 | 
||
| Weight | 
 140g (Without battery pack) 
360g (With BP-264 and antenna)  | 
||
Transmitter
| 
 IC-G80  | 
|
|---|---|
| RF output power (at 7.2V DC) | 
 5.0/2.5/0.5W (High/Mid/Low) 
 | 
| Spurious emissions | 
 Less than -70dB 
 | 
| Frequency stability | 
 ±2.5ppm 
 | 
Receiver
| 
 IC-G80  | 
||
|---|---|---|
| Sensitivity (at 12dB SINAD) | 
 0.18μV typ. 
 | 
|
| Adjacent channel selectivity (W/N) | 
 72/65dB typ. 
 | 
|
| Spurious & Image rejection | 
 80dB typ. 
 | 
|
| Intermodulation rejection | 
 72dB typ. 
 | 
|
| AF output power (at 5% distortion )  | 
Internal SP (With 16Ω load)  | 
 750mW typ. 
 | 
| External SP (With 8Ω load)  | 
 420mW typ. 
 | 
|
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | 
 MIL-810 F 
Method, Proc.  | 
|---|---|
| Low Pressure Storage | 
 500.4 I 
 | 
| Low Pressure Operation | 
 500.4 II 
 | 
| High Temperature Storage | 
 501.4 I 
 | 
| High Temperature Operation | 
 501.4 II 
 | 
| Low Temperature Storage | 
 502.4 I 
 | 
| Low Temperature Operation | 
 502.4 II 
 | 
| Temperature Shock | 
 503.4 I 
 | 
| Solar Radiation | 
 505.4 I 
 | 
| Rain Blowing | 
 506.4 I 
 | 
| Rain Drip | 
 506.4 III 
 | 
| Humidity Induced | 
 507.4 
 | 
| Salt Fog | 
 509.4 
 | 
| Dust Blowing | 
 510.4 I 
 | 
| Vibration | 
 514.5 I 
 | 
| Shock Functional | 
 516.5 I 
 | 
| Shock Transit Drop | 
 516.5 IV 
 | 
Also meets equivalent MIL-STD-810 -C, -D and -E.
Ingress Protection Standard
| Dust & Water | 
 IP54 (Dust-protection and water resistant) 
 | 
|---|
All stated specifications are subject to change without notice or obligation.



				


				
				
				
				
				
				
				