Icom IC-F6123D

Icom IC-F6123D

Icom IC-F6123D

Icom IC-F6123D UHF Mixed Mode Digital/Analog 450-520MHz Mobile Transceiver, merupakan Radio Rig dengan IDAS™ (Icom Digital Advanced System). Memiliki 128 memori channel, tampilan layar 8 karakter alfanumerik, 4W speaker depan. Memenuhi standar MIL-STD-810-F rugged body.

ICOM

Description

FEATURES of Icom IC-F6123D UHF Mixed Mode Digital/Analog Mobile Transceiver

128 channels with 8 zones

Ample 128 channel capacity allows most companies plenty of room to grow. Up to 8 zones lets you group together channels in logical fashion.

Built military rugged!

The tough aluminum die-cast chassis and polycarbonate front panel have been tested to the MIL standard 810 F.

Compact hand microphone

Select from 5 levels of mic gain, for clearer transmission.

GPS receiver connection

With optional D-SUB 25-pin ACC cable OPC-2078, an external GPS receiver or PC can be connected.
Note?No Digital Modulation “IN” using accessory cables.

8-character LCD

An 8-character alphanumeric LCD with user-friendly icons shows a variety of information and operating status such as caller’s name, received message, etc.

Large programmable buttons

For easy access to often used functions, P0-P3 buttons are programmable to meet specific needs. Buttons and LCD display are backlit for night time opeartion.

Powerful, front-facing speaker

4 watts (typ.) front facing speaker delivers clear and loud audio throughout a vehicle’s cabin. Digital modulation adds distinct clarity to received voices.

IDAS™ digital mode operation

The IC-F5123D series provides NXDN™ CAI-based IDAS digital mode operation. It is also compatible with IDAS multi-site conventional and IDAS single-site trunking. The following IDAS features are programmable.

  • PTT ID
  • Individual/Talkgroup list (Max. 500)
  • RAN (Radio Access Number)
  • Status
  • SDM (Short Data Message)
  • Call alert
  • Radio check (RX)
  • Stun/kill/revive (RX)
  • Remote monitor (RX)
  • Emergency (No ACK)
  • Digital voice scrambler
  • GPS data (PC and software required to show received position data)

Built-in 2-Tone and 5-Tone (Analog mode)

2-Tone and 5-Tone signalings give you selective calling, quiet stand-by and other convenient functions with programming. The stun/kill functions disable a radio over the air and the revive function restores the stunned radio.

MDC 1200 compatible (Analog mode)

The following MDC features are available with the built-in MDC signaling.

  • PTT ID
  • Radio check (RX)
  • Emergency (No ACK)
  • Stun/Revive (RX)
  • 500 alias table (Max.)

Scan features

The priority scan allows you to monitor one or two priority channels while scanning other non-priority channels. The TX channel and talk back functions allow you to make a quick response while scanning.

Lone worker function

When the radio is not operated for a preset period, a warning beep will sound, alerting the radio user to check in. If the radio user does not check in before the preset time runs out, then the radio automatically sends out an emergency signal.

Optional Active Noise Canceling Microphone

The optional active noise canceling microphone HM-211 can automatically reduce noise in extremely noisy environments and assist in transmitting clear and accurate audio.

 

Other features

  • CTCSS/DTCS encoder/decoder*
  • BIIS PTT ID transmission*
  • 8 DTMF autodial memories
  • Microphone hanger action programmable
  • Optional DTMF microphone (HM-152T)
  • PC programmable
  • Power-on password function
  • Time out timer
  • Talk around function
  • Nuisance delete function*
  • Forced narrow function*

* analog only

 

Brand

ICOM

ICOM

Spesifikasi

General

IC-F5123D

IC-F6123D

Frequency coverage
136-174MHz
350-400MHz
400-470MHz
450-512MHz
Number of channels
128 channels (8 zones)
Channel spacing
6.25/12.5/25kHz
Type of emission
16K0F3E, 8K50F3E, 4K00F1E/F1D
Current drain
(approx.)
Tx 50W/45W
10A
11A
25W
5A
Rx Stand-by
300mA
Max. audio
1.2A
Dimensions
(projections not included;
W×H×D)
50W/45W version
150×40×167.5 mm;
5.91×1.57×6.59 in
25W version
150×40×117.5 mm;
5.91×1.57×4.63 in
Weight 50W/45W version
1.1kg; 2.4lb
25W version
0.8kg; 1.8lb

Transmitter

IC-F5123D

IC-F6123D

RF output power 50W/45W version
50W, 25W, 5W
(Hi, L2, L1)
45W, 25W, 5W
(Hi, L2, L1)
25W version
25W, 10W, 2.5W
(Hi, L2, L1)
25W, 10W, 2.5W
(Hi, L2, L1)
Spurious emissions
70dB (min.)
Frequency stability
±1.0ppm
Audio harmonic distortion
3% typical
40% deviation
FM Hum and Noise
46/40dB typ. (Wide/Narrow)

Receiver

IC-F5123D

IC-F6123D

Sensitivity
0.25µV typ. (at 12dB SINAD)
0.18µV typ. (at 5% BER)
Adjacent channel selectivity
80/70dB typ. (W/N),
65dB typ. (digital)
75/65dB typ. (W/N),
60dB typ. (digital)
Spurious response rejection
70dB min.
Intermodulation rejection
75dB typ. (W/N),
70dBµV emf type. (digital)
AF output power
(at 5% distortion with an 4? load)
4W (typ.)

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard MIL-810 F
Method, Proc.
Low Pressure Storage
500.4 I
Low Pressure Operation
500.4 II
High Temperature Storage
501.4 I
High Temperature Operation
501.4 II
Low Temperature Storage
502.4 I
Low Temperature Operation
502.4 II
Temperature Shock
503.4 I
Solar Radiation
505.4 I
Humidity Induced
507.4
Settling Dust
510.4 III
Vibration
514.5 I
Shock Functional
516.5 I
Shock Transit Drop
516.5 IV

Also meets equivalent MIL STD 810 -C, -D and -E.
All stated specifications are subject to change without notice or obligation.

Reviews

There are no reviews yet.

Be the first to review “Icom IC-F6123D”

Your email address will not be published. Required fields are marked *

CONTACT US

  • Komplek Pertamina Patra II No. 24 Jl. Ahmad Yani By Pass Cempaka Putih – Jakarta Pusat 10510
  • (021) 4211456
  • marketing@radiokomunikasi.co.id

RECENT TWEETS