ICOM IC-F1000T


Compare

Icom IC-F1000T sangat ramping full keypad frekwensi VHF 136-174 MHz dengan tebal 24.5mm dan casing tahan air IP67 handy talky mampu bertahan dalam air

ICOM IC-F1000T VHF

IP67 Waterproof and Dust-tight Protection

The IC-F1000T has a 24.5mm slim depth with IP67 waterproof casing. The transceiver can withstand 1m depth of water for 30 minutes. Its dust-tight construction prevents the ingress of powder dust, sand, mud and other objects.

Enhanced Emergency with Built-in Motion Sensor
With a built-in motion sensor, the ICF1000S can detect its position, state of motion and non-motion and can send an emergency signal. The motion function detects if the transceiver is moving or shaking, for example, during a chase. The lone worker and man down functions are programmable.

Easy to Hear in a Noisy Environment
The large 36mm speaker of the transceiver provides clear companded 800 mW* audio. The built-in BTL amplifier doubles the audio output power and delivers loud and intelligible voice to a radio operator working in noisy environments.
* Typical with internal speaker

Inversion Voice Scrambler
The built-in inversion voice scrambler provides secure conversation. Up to 16 codes are selectable.

14 Hours of Operating Time with Supplied Waterproof Battery
The supplied waterproof Li-Ion battery pack, BP-279 (7.2V DC, 1485mAh), provides 14 hours* of operating time.
* Tx:Rx:Standby=5:5:90. Power save function ON.

Quiet Stand-by and More
The IC-F1000T has built-in 2-Tone, 5-Tone, CTCSS and DTCS signaling capabilities for group communication and selective calling..

MDC 1200 Compatible
The following MDC features are programmable.

PTT ID
Emergency (No ACK transmission)
Radio check (RX only)
Stun/Revive (RX only)
Transmit status messages (LCD types only)
100 alias table (LCD types only)

ICOM IC-F1000T has Channel Announcement
When you rotate the channel knob, the radio announces the channel number.
Convenient for making radio adjustments without having to look at the radio.

Other Features

8 DTMF autodial memories
BIIS PTT ID and emergency call
“Shift key” function increases number of programmable key assignments
Surveillance function
Escalating alarm
Optional HM-168LWP, waterproof speaker-mic
Supplied accessories

Battery pack, BP-279
Desktop charger, BC-213
AC adapter, BC-123S
Belt clip, MB-133
Antenna

*May differ depending on version

ICOM IC-F1000T SPECIFICATIONS

General

IC-F1000T

Frequency coverage
(Varies according to version)
USA
136–174MHz
EXP
Number of channels IC-F1000
IC-F2000
16 channels
IC-F1000T/S
IC-F2000T/S
128 channels
Type of emission
16K0F3E*/11K0F3E
Channel spacing
12.5/25kHz
Power supply requirement
7.5V DC nominal
Current drain Tx High
1.3A
Rx Stand-by
77mA
80mA
Max. audio
(Internal SP)
330mA
300mA
Antenna impedance
50O
Operating temperature range
(Radio specification)
–30°C to +60°C; –22°F to +140°F
Dimensions
(projections not included; W×H×D)
52.2×111.8×24.5mm
2.06×4.4×0.96 in
(With BP-279)
Weight (approx.)
240g
8.47oz
(With BP-279)

Transmitter

IC-F1000T

RF output power
5W, 2W, 1W
(Hi, L2, L1)
Max. frequency deviation (W/N)
± 5.0kHz/±2.5kHz
Spurious emissions
70dB min.
Frequency stability
±2.5ppm
Audio harmonic distortion (W/N)
.0%/1.5% typ.
(AF 1kHz 40% deviation)
FM Hum and Noise (W/N)
46/40dB typ.
Ext. microphone connector
3-conductor 2.5 (d) mm (1/10″)/2.2kO

Receiver

IC-F1000T

Sensitivity (at 12dB SINAD)
0.25µV typ.
Adjacent channel selectivity (W/N)
76/53dB typ.
Spurious response rejection
70dB min.
Intermodulation rejection
74dB typ.
Hum and noise (W/N)
51/45dB typ.
AF output power
(at 5% distortion)
Internal SP
800mW typ.(With 12O load)
External SP
400mW typ.(With 😯 load)
Ext. speaker connector
2-conductor 3.5 (d) mm (1/8″)/8O

Measurements made in accordance with TIA-603 (USA/EXP).
All stated specifications are subject to change without notice or obligation.

FUNCTION COMPARISON AND INTERNAL UNIT OPTIONS

IC-F1000T

Number of option slots
CTCSS/ DTCS encoder
Available
decoder
Available
2-Tone encoder
Available
decoder
Available
5-Tone encoder
Available
decoder
Available
DTMF autodial
Available
DTMF decoder
Voice Scrambler Inversion
Available
Non-rolling
Rolling
APCO P25 digital
6.25kHz digital
MDC 1200
Available (Limited functions)
Motion function
Available
Lone worker function
Available
Man down function
Available
Intrinsically safe
Voice announcement
Available
Audio compander
Available
GPS receiver

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard MIL-810 G
Method, Proc.
Low Pressure Storage
500.5 I
Low Pressure Operation
500.5 II
High Temperature Storage
501.5 I
High Temperature Operation
501.5 II
Low Temperature Storage
502.5 I
Low Temperature Operation
502.5 II
Temperature Shock
503.5 I-C
Solar Radiation
505.5 I
Rain Blowing
506.5 I
Rain Drip
506.5 III
Humidity Induced
507.5 II
Salt Fog
509.5
Dust Blowing
510.5 I
Immersion
512.5 I
Vibration
514.6 I
Shock Functional
516.6 I
Shock Transit Drop
516.6 IV

Also meets equivalent MIL-STD-810 -C, -D, -E and -F.

Ingress Protection Standard IC-F1000T
Dust & Water
IP67 (Dust-tight and waterproof protection)

All stated specifications are subject to change without notice or obligation.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.