Icom IC-A120

Icom IC-A120

Icom IC-A120

Icom IC- A120 VHF air band mobile transceiver merupakan radio rig dari Icom dengan dua fitur baru: Active Noise Canceling (ANC) dan Bluetooth®. ANC built-in mengurangi kebisingan dan efektif di lingkungan bandara yang sangat bising. Automatic noise limiter (ANL) mengurangi pulse-type noise seperti noise pada mesin ignition.

Unit ini sangat bagus untuk aplikasi mobile dan tersedia di base station. Dirancang untuk spec militer untuk keandalan yang luar biasa!

ICOM

Description

 

Output power: 36W (P.E.P)
Frequencies: 118.000-136.992MHz
Channel spacing: 8.33/25kHz
Channels: 200 with 12 character channel names
LCD display: Dot-matrix with alphanumeric characters & icons
Waterproof rating: IP54 dust protection & water resistant
Mount option: Mounting bracket included

High Visibility, Simple Operation

The full dot-matrix LCD allows for high visibility and clearly shows alphanumeric characters and icons. Programming memory channels and other radio settings can be simply made from the front panel by radio users. These customizing functions can also be restricted, depending on the radio settings.

Active Noise Cancelling (ANC)

The newly added built-in ANC reduces background noise in the received and transmitting signals. This function is effective in extremely noisy airport environments full of aircraft noise. The automatic noise limiter (ANL)* reduces pulse-type noise such as engine ignition. * The ANL and ANC functions cannot be used at the same time.

IP54 Dust-Protection and Water Resistance

The IC-A120/E has IP54 dust-protection and water resistance. This construction allows for use in open-air vehicles.

Optional Bluetooth® Headset Connectivity

With the optional UT-133 Bluetooth® unit, the IC-A120/E can be used with a third-party wireless Bluetooth® headset. Also, using the optional VS-3 Bluetooth® headset, the side tone function is available.

ON-hook scan and dualwatch functions

The ON-Hook scan function automatically starts scanning when the hand microphone is hooked on the microphone hanger. When you take the microphone OFF hook, the scanning stops at the priority channel or displayed channel. The Dualwatch function checks the priority and operating channels alternatively.

Side tone function

When using a third-party headset with the optional OPC-871A headset adapter, the side tone function allows you to monitor your own transmitted voice via the connected headset. Even when using a hand microphone, your voice can be monitored from the headset.

Additional features

  • Compatible with both 12V and 24V systems
  • Dualwatch and priority scan functions
  • Power on password protection
  • CI-V commands for external control
  • Connect with other radio devices with the VE-PG3 RoIP gateway

 

Brand

ICOM

ICOM

Spesifikasi

Specifications

General
Frequency range (Tx/Rx) 118.000–136.992MHz
Channel spacing 25kHz/8.33kHz
Type of emission A3E (AM)
Number of memory channels 200 channels
Antenna connector M type (50 Ohms)
Power supply requirement

13.75V/27.5V DC

Current drain (@ 13.75 V DC)
Transmitting
Receiving
:
5.0A (maximum)
4.0A (at AF max.), 0.5A (at stand-by)
Operating temperature range -30oC to +60oC;
Frequency stability ±5ppm (–30oC to +60oC)
Dimensions (W×H×D)

(Projections not included)

161×45×193 (mm);

6.34×1.77×7.6 (in) (approximately)

Weight (approx.) 1.5kg; 3.3lb
Transmitter
Output power (at 13.75V)
(Carrier Power)
9.0W typ.
Modulation 70% to 100%
Spurious emissions
(* Harmonics/Non-harmonics,
30MHz–1GHz)
Less than 60dB
Microphone impedance 600 Ohms
Receiver
Intermediate freq. 38.85MHz/450kHz (1st/2nd)
Sensitivity (pd) 1 µV (6dB S/N)
Selectivity

8.33kHz

25kHz

:2.778/7.37kHz (6dB/60dB)

8/25kHz (6dB/60dB)

Spurious response More than 74dBµ
Audio output power

Internal SP (8 Ohms load)

External SP (8 Ohms load)

Headphone (500 Ohms load)

10% distortion, 60% modulation

1.5W typical

More than 10W

More than 100mW

Measurements made in accordance with FCC Part 87 for USA version or EN 300 676-1 for Europe version. All stated specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifications

Icom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows:

Standard MIL 810G
Method Procedure
Low Pressure 500.5 I, II
High Temp. 501.5 I, II
Low Temp. 502.5 I, II
Temp. Shock 503.5 I-C
Solar Radiation 505.5 I
Humidity 507.5 II
Vibration 514.6 I
Shock 516.6 I

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Applicable IP Rating

Ingress Protection Standard
Dust & Water IP54 (Dust-protection and water resistance)

Supplied Accessories

  • Hand microphone, HM-216
  • DC power cable
  • Microphone hanger kit
  • Mounting bracket kit
  • Fuses

Reviews

There are no reviews yet.

Be the first to review “Icom IC-A120”

Your email address will not be published. Required fields are marked *

CONTACT US

  • Komplek Pertamina Patra II No. 24 Jl. Ahmad Yani By Pass Cempaka Putih – Jakarta Pusat 10510
  • (021) 4211456
  • marketing@radiokomunikasi.co.id

RECENT TWEETS