Alinco DJ 195/196


Out of stock



Alinco DJ 195/196. Jual Produk terbaru Alinco, Alinco telah merilis 2 HT yang menetapkan standar baru dalam fitur, kenyamanan dan pengoperasian yang mudah. Alinco DJ-195 / DJ-196 memiliki memori layar alfanumerik untuk memudahkan pengaturan.

Alinco DJ-195T/196T 2 Meter HT

Power, features, convenience and fun!

Alinco has created a new 2 meter HT that sets new standards in features, convenience and easy operation. The DJ-195/196 sports an alphanumeric display for easy memory management. It has an ergonomic design that’s “user friendly” and the 5 watt output battery is standard. You’ll be ready to travel the world with CTCSS encode+decode, DCS and European tone bursts, all included at no extra cost. Best of all, the DJ-195/196 retains the proud Alinco tradition of quality construction and excellent value.

• Alphanumeric display
• 40 memory channels
• 5 watt output with standard battery
• CTCSS encode+decode and DCS
• 13.8 VDC direct input with battery charge feature
• Direct frequency input
• S-meter
• Autodialer
• Cable Cloning
• Computer programmable (third party software required)
• MARS/CAP capability (DJ-195T/196T)
• Additional features, including theft alarm!
• Back-lit keypad (DJ-196T Only)

Alinco DJ-195T/196T 2 Meter HT

Alphanumeric Display Label channels in an easy-reading format. Display frequency, alpha label or channel number only.
40 Memory Channels Plenty of room to store your favorite simplex or repeater frequencies along with alphanumeric label, offset, CTCSS encode/decode or DCS setting.
5 watts output The standard battery allows the DJ-195/196 to produce up to 5 watts. A power input portAccepts 13.8 VDC and charges the battery, but won’t allow destructive overcharge.
CTCSS, DCS, Tone Bursts and DTMF Be prepared for virtually any selective calling situation or gaining access to repeaters with protected inputs. European Tone Bursts include 1000, 1450, 1750 and 2100 Hz.
Direct Frequency Input Frequency entry is easy using the well-spaced keypad.
S-Meter Displays relative signal strength.
Cable Cloning Share identical settings among multiple DJ-195/196 transceivers. Saves time and ensures uniform operation.
Removal Alarm The DJ-195/196 can be set to emit a tone when disconnected from an external power source until proper action is taken to silence the alarm.
Experimental Insect Repel Feature Can the DJ-195/196 actually repel mosquitoes? Activate the special tone and decide for yourself! You may find the DJ-195/196 can “de-bug” your outdoor operating site!



DJ-196T Specifications

Receive Frequency (original status) 130 to 174 MHz (F2 F3 only)
Transmit Frequency 144 to 147.995 MHz
Frequency Stability ± 5ppm (-10° to +60°C.)
Antenna Impedance 50 ohm unbalanced
Supply Voltage DC 13.8V rated (6.0 min to 16V max)
Ground Negative Ground
Transmit Current Consumption (@13 VDC) 1.2 Amps (5 watts)
Receive Current Consumption (@13 VDC) 200 mA (50 mA squelched, 20 mA battery save)
Operating Temperature Range -10° to +60°C.
Dimensions (w/o projection) 2.2 x 4.9 x 1.6 inches (56x124x40 mm)
Output power 5 W 13.8 V or EBP48N (Low=0.5W)
Modulation Variable reactance
Max. Deviation n/a
Spurious Emission less than -60db
Microphone Impedance 2k ohms approx.
Circuit Double conversion superheterodyne
1st IF Frequency 21.7MHz
2nd IF Frequency 450 kHz
Sensitivity 12db SINAD 0.2uV or less, better than -8 dbu
Selectivity except WFM more than 12 kHz -6db
Image/spurious response <-60db
AF out at 10% distort. 13.8V Max 300 mW
AF impedance 8 ohms
Specifications are subject to change without notice.


Based on 0 reviews

0.0 overall

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.